Cropmaster 11
- Home
- Products
- Fertiliser
- Cropmaster 11
Cropmaster 11 is a blend of DAP with chipped Potassium Chloride. These components all have similar particle size (2-4mm diameter) which minimises segregation during transport and spreading.
The colour of the individual components can vary depending on where they are sourced. DAP can vary from light brown to black and Potassium Chloride can be red to pink or white to grey. Please note that colour does not indicate the chemical quality of the product.
-
Why Use
- Provide N (10.8%), P (12%) & K (20%) for field crops, greenfeed brassicas, sheep, beef and dairy pasture
- A cost-effective product providing readily available N, P & K
- Has good spreading and flow characteristics
-
Safety Information
Cropmaster 11 Safety Data Sheet
Caution when mixing
Although Cropmaster 11 generally mixes well with other products, it is not compatible with the following:
Superphosphate, Sulphur Super 30 and Magnesium OxideCropmaster 11 can be compatible with the following under certain circumstances:
Dry LimeSegregation may occur when mixed with a product with differences in particle size.
Compatibility
-
Benefits and uses
The primary use for Cropmaster 11 is as a fertiliser to provide nitrogen (10.8%), phosphate (12%) and potassium (20%) for field crops, greenfeed brassicas, sheep, beef and dairy pasture. It can be used as an alternative source of phosphate if soil sulphate levels are high or sulphate is not required.
APPLICATION
Because all Cropmaster products contain nitrogen, correct calibration of application equipment is important.
As with most solid fertilisers, Cropmaster 11 can be stored over a season as long as it is kept in a cool, dry, well ventilated area. Store bags in a dry place ensuring they are tightly sealed.
Also, clean drills and spreaders after use to avoid corrosion. -
Arable
Use as a planting fertiliser for field crops at 60-200kg/ha. Although at the higher rates it may be advisable to broadcast rather than drill the product. For process crops, rates can be much higher with an application rate of 150-625kg/ha depending on phosphate requirements. For greenfeed brassicas, an application rate of 100-300kg/ha is required. It is important to avoid seed contact. If direct drilling, use lower drilling rates (<100 kg DAP/ha). If more is required, the balance should be broadcast.
-
Pastoral
Use as a maintenance phosphate fertiliser with an application rate of 90-200kg/ha on sheep & beef farms or to meet some of the maintenance phosphate requirements on a dairy farm, especially where strategic nitrogen is required.
Actual spreading rates will vary according to farm type, climate, productivity and soil type. Soil testing and fertiliser plans are available to ensure you use the right product at the correct rate. Call our Customer Centre for information.
-
Why Use
- Provide N (10.8%), P (12%) & K (20%) for field crops, greenfeed brassicas, sheep, beef and dairy pasture
- A cost-effective product providing readily available N, P & K
- Has good spreading and flow characteristics
-
Safety Information
Cropmaster 11 Safety Data Sheet
Caution when mixing
Although Cropmaster 11 generally mixes well with other products, it is not compatible with the following:
Superphosphate, Sulphur Super 30 and Magnesium OxideCropmaster 11 can be compatible with the following under certain circumstances:
Dry LimeSegregation may occur when mixed with a product with differences in particle size.
Compatibility
-
Benefits and uses
The primary use for Cropmaster 11 is as a fertiliser to provide nitrogen (10.8%), phosphate (12%) and potassium (20%) for field crops, greenfeed brassicas, sheep, beef and dairy pasture. It can be used as an alternative source of phosphate if soil sulphate levels are high or sulphate is not required.
APPLICATION
Because all Cropmaster products contain nitrogen, correct calibration of application equipment is important.
As with most solid fertilisers, Cropmaster 11 can be stored over a season as long as it is kept in a cool, dry, well ventilated area. Store bags in a dry place ensuring they are tightly sealed.
Also, clean drills and spreaders after use to avoid corrosion. -
Arable
Use as a planting fertiliser for field crops at 60-200kg/ha. Although at the higher rates it may be advisable to broadcast rather than drill the product. For process crops, rates can be much higher with an application rate of 150-625kg/ha depending on phosphate requirements. For greenfeed brassicas, an application rate of 100-300kg/ha is required. It is important to avoid seed contact. If direct drilling, use lower drilling rates (<100 kg DAP/ha). If more is required, the balance should be broadcast.
-
Pastoral
Use as a maintenance phosphate fertiliser with an application rate of 90-200kg/ha on sheep & beef farms or to meet some of the maintenance phosphate requirements on a dairy farm, especially where strategic nitrogen is required.
Actual spreading rates will vary according to farm type, climate, productivity and soil type. Soil testing and fertiliser plans are available to ensure you use the right product at the correct rate. Call our Customer Centre for information.